1 Before Using the Machine
22
Before Using the Machine
1
3 Open the front cover.
4 Press the main power switch to the [ ] position to switch off the main power.
5 Connect the network cable to the Ethernet interface connector.
z
When the Gigabit Ethernet Board
(optional) is installed.
z
When the Gigabit Ethernet Board
(optional) is NOT installed.
Note • Prepare a network cable suitable for your network connection. When changing the network
cable, consult our customer engineers.
6 Press the main power switch to the [ | ] position to switch on the main power.
7 Close the front cover.
8 Press the power switch to the [ | ] position to switch on the power.
For more information on the setting items, refer to "Printer Environment Settings" (P.299).
To Next Page
Loading...
Need help?
General
