Fuji Xerox ApeosPort-IV C7780 Administrator's Guide

Error Code
535
Problem Solving
15
071-211
[Cause] An error occurred in Tray 1.
[Remedy] Confirm the paper loading condition for Tray 1. Switch off the machine
power, make sure that the touch screen is blank, and then switch on the
machine power. If the same message is displayed again, contact our
Customer Support Center.
072-210
[Cause] Tray 2 malfunction
[Remedy] Confirm the paper loading condition for Tray 2, and then switch off the
machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our
Customer Support Center. You can use a tray other than Tray 2.
072-211
[Cause] An error occurred in Tray 2.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is displayed
again, contact our Customer Support Center.
073-210
[Cause] Tray 3 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the
machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our
Customer Support Center. You can use a tray other than Tray 3.
073-211
[Cause] An error occurred in Tray 3.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is displayed
again, contact our Customer Support Center.
074-210
[Cause] Tray 4 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the
machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our
Customer Support Center. You can use a tray other than Tray 4.
074-211
[Cause] An error occurred in Tray 4.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is displayed
again, contact our Customer Support Center.
075-210
075-211
[Cause] Tray 5 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the
machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our
Customer Support Center.
077-312
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is displayed
again, contact our Customer Support Center.
077-320
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the same message is displayed
again, contact our Customer Support Center.
078-215
[Cause] An error occurred in Tray 6.
[Remedy] Switch off the machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.

Fuji Xerox ApeosPort-IV C7780 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-IV C7780
Category	All in One Printer
Language	English