Paper Jams
561
Problem Solving
15
2 Turn the green lever 2 at the center of the
transfer module to the right until it is in the
horizontal position and then pull the transfer
module out to the end.
3 Remove the visible jammed paper.
Note • If paper is torn, check for any torn pieces
of paper in the unit.
4 Move the lever 2a to the right and remove
the jammed paper.
5 Pull down the lever 2b (1) and remove the
jammed paper (2).
6 Return the lever 2a and 2b to the original position.
7 Insert the transfer module completely (1) and
turn the green lever 2 to the left (2).
Note • If you cannot turn the lever, pull the
transfer module out to the middle and
insert it again.
8 Close the front cover.
Note • A message will be displayed and the machine will not operate if the front cover is even
slightly open.