16 Appendix
608
Appendix
16
Finisher C2 with Booklet Maker
Staple Capacity : 50 sheets (90 gsm
or less)
Paper Size : Maximum: A3, 11 × 17",
Minimum: B5
Position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using 80 gsm paper
Punch Paper Size : A3, 11 × 17", B4, A4
*
, A4 , 8.5 ×
11", 8.5 × 11" , B5 , 7.25 ×
10.5" , 8 × 10"
*
, 8 × 10" , 16K ,
Cover A4 , 9 × 11", 215 × 315 mm,
8.5 × 13"
*
, 8.5 × 14"
*
, 11 × 15", 8K
* The 3 holes (optional) are not available.
Number of Holes : 2 or 3 (optional)
Note • US 2/3 Hole Punch Kit for Finisher C (optional) is required
for 2 and 3 hole punches.
Paper Weight : 64 - 200 gsm
Important • When using 80 gsm paper
Dimensions/Weight Width 772 × Depth 650 × Height 1,010 mm, 55 kg
Space Requirement Width 2,024 × Depth 804 mm (main unit + Finisher C2, when the
Middle Size Color UI is installed, and the bypass tray and the
extension tray are fully extended)
Width 2,024 × Depth 804 mm (main unit + Finisher C2, when the
Large Size UI Kit is installed, and the bypass tray and the
extension tray are fully extended)
Type Output tray × 1:Collate
Stack
Finisher tray × 1: Collate (offset stacking available)/
Stack (offset stacking available)
Booklet tray × 1 : Collate
Stack
Paper Size / Paper
Weight
Output tray Maximum: 13 × 19", 12.6 × 19.2"
Minimum: postcards, 64 - 300 gsm
Finisher tray Maximum: 13 × 19", 12.6 × 19.2"
Minimum: B5 , 64 - 220 gsm
Booklet tray Maximum: A3, 11 × 17"
Minimum: 8.5 × 11", 64 - 220 gsm
Stacker Capacity Output tray 500 sheets (A4)
Finisher tray (not stapled)
A4: 3,000 sheets
B4 or larger: 1,500 sheets
Mixed stack*
1
: 300 sheets
Finisher tray (stapled)
A4: 200 sets or 1,500 sheets
B4 or larger:100 sets or 1,500 sheets
Mixed stack*
1
: 70 sets or 200 sheets
Booklet tray 20 sets*
2
*1 Larger size paper is stacked on top of smaller size paper.
*2
Some papers may not be placed into a tray depending on the paper
type.
Important • When using 80 gsm paper
To Next Page
Loading...
