Adjust Image Transfer
637
Appendix
16
6 Select [Adjust Image Transfer].
7 Select [Paper Type].
8 Select the paper type you want to adjust,
and press [Close].
9 Adjust the value for image transfer.
Making adjustment using [Enter Sample Number]
1) Select [Enter Sample Number] and select
[Print Sample].
2) Select the size of the paper which you
loaded in Tray 5 (Bypass), and then
select [1 Sided] or [2 Sided].
3) Press the <Start> button.
A sample printout, as shown in the following illustration, is printed.
To Next Page
Loading...
