16 Appendix
658
Appendix
16
Layout 505 Sets the layout for printing.
Note • This item can be set when [PDF Bridge] is selected for [Print
Processing Mode].
[0] (Default) : Auto %
[2] : 2-up
[3] : 4-up
[4] : 100% (size-by-size)
The [Auto %] setting automatically calculates the largest magnification
possible to fit to the output paper size.
The [2-up] setting prints two pages onto one sheet of paper. When [2-Up]
is selected, the paper size is fixed at A4.
The [4-up] setting prints four pages on each sheet of paper. When [4-Up]
is selected, the paper size is fixed at A4.
Paper size 506 Sets the size of the paper to be printed.
[0] (Default) : Auto
[1] : A4
The [Auto] setting automatically determines the paper size, based on the
size and settings of a DocuWorks file to be printed.
Output color 507 Sets whether to print in color or monochrome.
[0] (Default) : Auto
[1] : Black
The [Auto] setting automatically determines the output color: color or
monochrome for each page. If colors other than black and white are used
on the original, the machine prints the document in color, and if only black
and white are used on the original, the machine prints in monochrome.
Setting Item
Item
Number
Value
To Next Page
Loading...
Need help?
General
