16 Appendix
702
Appendix
16
Job Counter Report
If you specify multiple different [Pages per Side] settings using the Build Job feature,
the numbers of pages displayed for [2 Pages] and [Greater than 2 Pages Up] displayed
on the Job Counter Report are calculated according to the latest N-up setting you
specify.
Example 1:
When you select [2 Pages] for Document 1 (4 pages) and [Off] for Document 2 (2
pages), both Documents 1 and 2 are set to [Off] and the number of printed pages is
calculated as follows:
z
Total pages: 4
z
2 up: 0
Example 2:
When you select [Off] for Document 1 (4 pages) and [2 Pages] for Document 2 (2
pages), both Documents 1 and 2 are set to [2 Pages] and the number of printed pages
is calculated as follows:
z
Total pages: 5
z
2 up: 5
On ApeosWare Log Management or ApeosWare Accounting Service, the numbers of
pages for 2in1, 4in1, and 8in1 are also calculated in the same way as described above.
The meter on the [Billing Information] screen calculates the number of printed pages
correctly regardless of the [Pages per Side] setting.
Folder Passcode
z
You do not need to specify the passcode of a recipient when sending an IP Fax (SIP)
to a remote folder. Thus, the passcode enclosed in "\" or "/" is not replaced by "*" as
with that of regular faxes. If you select an IP Fax (SIP) by mistake and specify the
passcode of a recipient when you send a fax or an Internet fax, the passcode is
displayed on the touch panel screen, the Job Status screen, and a report. Be sure to
check the type of fax before sending a fax to a remote folder.
z
Communications and Information network Association of Japan (CIAJ) confirms the
use of image-/tiff-fx.