Replacing Consumables
71
Maintenance
3
îš„Handling consumables/periodical replacement parts
z
Do not store boxes for consumables/periodical replacement parts upright.
z
Do not unpack consumables/periodical replacement parts before use. Avoid storing
consumables/periodical replacement parts in the following locations:
- In extreme temperature and humidity
- Near heat-generating devices
- In direct sunlight
- In dusty locations
z
When using consumables/periodic replacement parts, carefully read precautions for
use. Precautions for use are instructed on their bodies or packages, or a precaution
sheet is included in their packages.
z
We recommend always having spare consumables/periodical replacement parts
available.
z
When calling our Customer Support Center to order consumables/periodical
replacement parts, have the product codes ready.
z
Use of consumables/periodical replacement parts not recommended by Fuji Xerox
can impair machine quality and performance. Use only consumables/periodical
replacement parts recommended by Fuji Xerox.
îš„Checking the status of consumables
The status of consumables can be checked on the [Supplies] screen.
For information about consumables, refer to "Supplies" (P.125).
The following shows the reference section for each item.
Replacing the Toner Cartridges..................................................................................................72
Replacing the Waste Toner Bottle ............................................................................................. 74
Replacing Drum Cartridge R1 (for customers having a spot maintenance contract)................. 76
Replacing Drum Cartridge R2/R3/R4 (for customers having a spot maintenance contract)..... 79
Replacing the Staple Cartridge for Finisher C2 or Finisher C2 with Booklet Maker................ 84
Replacing the Booklet Staple Cartridge (Finisher C2 with Booklet Maker
or Finisher D2-P with Booklet Maker) ...................................................................................... 85
Replacing the Staple Cartridge for Finisher D2-P with Booklet Maker .................................... 87
Emptying the Punch Scrap Container for Finisher C2 or Finisher C2 with Booklet Maker...... 88
Emptying the Punch Scrap Container for Finisher D2-P with Booklet Maker.......................... 89
Replacing the Staple Scrap Container for Finisher D2-P with Booklet Maker ......................... 90
CAUTION
z
Keep the drum and toner cartridges out of the reach of children. If a child
accidentally swallows toner, spit it out, rinse mouth with water, drink water and
consult a physician immediately.
z
When replacing the drum and toner cartridges, be careful not to spill the toner. In
case of any toner spills, avoid contact with clothes, skin, eyes and mouth as well
as inhalation.
z
If toner spills onto your skin or clothing, wash it off with soap and water.
If you get toner particles in your eyes, wash it out with plenty of water for at least
15 minutes until irritation is gone. Consult a physician if necessary.
If you inhale toner particles, move to a fresh air location and rinse your mouth with
water.
If you swallow toner, spit it out, rinse your mouth with water, drink plenty of water
and consult a physician immediately.
To Next Page
Loading...
Need help?
General
