Activity Report
723
Appendix
16
Status The result of the operation is indicated.
Completed......The operation ended normally.
Busy...............The recipient is busy or did not answer.
Auto Send ......The document is being re-sent and the set re-
send times has not been exceeded.
Canceled........The communication was terminated.
Check Remote Station ... An error caused by the recipient or
the line during communication.
Send Again Document must be re-transmitted
due to an error occurred in the
sending process for the auto
retransmission limit being
exceeded.
Receive Again ...Ask recipient to re-instruct poll due
to an error occurred in the polling
process.
... Ask recipient to re-send due to an
error occurred in the receiving
process.
Disconnected ... Check that the line is properly
connected.
...When IP Fax (SIP) is used, check
that the network cable is properly
connected.
XXX-XXX Error code
For more information on lines, refer to "2 Product Overview" >
"Machine Components" > "Telephone line connectors" in the User
Guide and for more information on XXX-XXX (error code), refer to
"Error Code" (P.469).
For more information on how to connect network cables, refer to
"Using the Ethernet Interface" (P.21) and for more information on
XXX-XXX (error code), refer to "Error Code" (P.469).
Total All pages received or sent are recorded.
Item Description
To Next Page
Loading...
Need help?
General
