Replacing Consumables
73
Maintenance
3
1 Open the front cover.
2 Hold the lower part of the toner cartridge of
the color indicated in the message and
gently pull out it.
Note • “Y” is for yellow, “M” is for magenta, “C” is
for cyan, and “K1” and “K2” is for black.
3 Remove the toner cartridge by holding the
handle on the top of the cartridge while
gently pulling out it.
Important • Pull out the toner cartridge gently. Otherwise, toner may fly out of the cartridge.
• If you have a used toner cartridge no longer needed, contact your local Fuji Xerox
representative for its disposal.
4 Take out the new toner cartridge of the same
color as the old one from its box, and gently
tilt the cartridge up and down, and then left
and right several times.
WARNING
Never throw a toner cartridge into
an open flame. Remaining toner
in the cartridge may catch fire
and cause burn injuries or
explosion.
If you have a used toner cartridge
no longer needed, contact your
local Fuji Xerox representative
for its disposal.
To Next Page
Loading...
