3 Maintenance
86
Maintenance
3
2 While pressing the levers R2 and R3 to the
right (1), pull out the unit (2).
3 Hold the left and right tabs on the staple
cartridge to pull the cartridge out.
4 Hold the left and right tabs on the new staple
cartridge to return the cartridge to its original
position, and gently push the cartridge until it
clicks into place.
5 Return the unit to its original position.
6 Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
R2
R3
To Next Page
Loading...
