3 Maintenance
96
Maintenance
3
1 Lift the latch of the document feeder top
cover until it is completely open.
Note • When you fully open the cover, it enters a
fixed position. Open the cover gently.
2 While turning the roller, gently clean it with a
soft cloth moistened with water.
Important • Do not use cleaning agents other than
water or neutral detergent.
• Use a cloth firmly wrung to prevent water
drops from falling into the machine. If
water gets into the machine, it may cause
machine malfunction.
Note • If dirt does not come off easily, gently
wipe it with a soft cloth moistened with a
small amount of neutral detergent.
3 Close the top cover of the document feeder until it clicks into place.
4 Close the left cover of the document feeder until it clicks into place.
To Next Page
Loading...
Need help?
General
