Fujitsu Server PRIMERGY TX1330 M1 - Removing Expansion Cards; Preliminary Steps

TX1330 M1 Upgrade and Maintenance Manual 179
Expansion cards and backup units
Ê "Connecting the server to the mains" on page 67
Ê "Switching on the server" on page 68
Ê "Updating RAID controller firmware" on page 80
Ê If applicable, "Enabling Option ROM scan" on page 81
Ê "Enabling SVOM boot watchdog functionality" on page 84
Ê "Enabling BitLocker functionality" on page 90
Ê If applicable, "After replacing / upgrading LAN controllers" on page 94
9.4.2 Removing expansion cards
9.4.2.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 69
Ê "Shutting down the server" on page 46
Ê "Disconnecting the server from the mains" on page 46
Ê Remove all external cables from the expansion card to be removed.
Ê "Getting access to the component" on page 47
Ê "Removing the fan module" on page 151
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less