EasyManua.ls Logo

Fujitsu Server PRIMERGY TX1330 M1 - Field Replaceable Units (FRU)

Fujitsu Server PRIMERGY TX1330 M1
336 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24 Upgrade and Maintenance Manual
TX1330 M1
Before you start
V CAUTION!
The device may be seriously damaged or cause damage if it is opened
without authorization or if repairs are attempted by unauthorized and
untrained personnel.
Components that are handled as Upgrade Units
Processors (upgrade kits)
Optical disk drives
Backup drives
Expansion cards
Battery backup units
Memory modules
USB Flash Module (UFM)
Components that are handled solely as Repair Units
CMOS battery
Non hot-plug fans
Non hot-plug hard disk drives
2.1.3 Field Replaceable Units (FRU)
Removing and installing Field Replaceable Units involves complex maintenance
procedures on integral server components. Procedures will require shutting
down, opening and disassembling the server.
V CAUTION!
Maintenance procedures involving Field Replaceable Units must be
performed exclusively by Fujitsu service personnel or technicians trained
by Fujitsu. Please note that unauthorized interference with the system
will void the warranty and exempt the manufacturer from all liability.
Components that are handled as Field Replaceable Units
Processor (replacement)
SAS / SATA backplanes
Power distribution board
Field Replaceable Units (FRU)

Table of Contents

Related product manuals