10.3 Installing memory modules
10.3.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 69
Ê "Disabling SVOM boot watchdog functionality" on page 70
Ê "Shutting down the server" on page 46
Ê "Disconnecting the server from the mains" on page 46
Ê "Getting access to the component" on page 47
Ê "Removing the fan module" on page 151
10.3.2 Installing a memory module
Ê Identify the correct memory slot see section "Memory sequence" on
page 210.
Figure 124: Installing memory modules
Ê Press out the securing clip at each end of the memory slot (1).
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
To Next Page
Loading...
