Fujitsu Server PRIMERGY TX1330 M1 - Removing the Defective TPM; Installing the New TPM; Concluding Steps

TX1330 M1 Upgrade and Maintenance Manual 273
System board and components
14.4.3.2 Removing the defective TPM
Ê Remove the TPM as described in section "Removing the TPM" on page 268.
Ê Leave the TPM spacer on the system board when removing the defective
TPM.
14.4.3.3 Installing the new TPM
Ê The TPM spacer is already present on the system board.
Ê Install the TPM as described in section "Installing the TPM" on page 264.
14.4.3.4 Concluding steps
Ê "Installing the fan module" on page 152
Ê "Reassembling" on page 58
Ê "Connecting the server to the mains" on page 67
Ê "Switching on the server" on page 68
Ê "Enabling BitLocker functionality" on page 90