Fujitsu Server PRIMERGY TX1330 M1 User Manual

58 Upgrade and Maintenance Manual TX1330 M1
Basic hardware procedures
4.5 Reassembling
V CAUTION!
● Before attaching the covers, make sure no unnecessary parts or tools
are left inside the server.
● In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the top / side cover is removed.
● For further safety information, please refer to chapter "Important
information" on page 31.
4.5.1 Rack model
4.5.1.1 Installing the rack front cover
Figure 14: Installing the rack front cover
Ê Fit the rack front cover on the server front (1).
Ê Carefully fold up and close the rack front cover (2).

Fujitsu Server PRIMERGY TX1330 M1 Specifications

General

Memory Slots	4
Form Factor	Tower
Chipset	Intel C226
Processor Sockets	1
Processor	Intel Pentium, Intel Celeron
RAID Support	RAID 0, 1, 5, 10
Drive Bays	8 x 3.5-inch
Operating System Support	Windows Server, Red Hat, SUSE, VMware