Fujitsu Server PRIMERGY TX1330 M1 User Manual

286 Upgrade and Maintenance Manual TX1330 M1
System board and components
Ê "Verifying the system time settings" on page 86
Ê "Looking up changed MAC / WWN addresses" on page 91
Ê "Updating the NIC configuration file in a Linux environment" on page 88
Ê "Enabling SVOM boot watchdog functionality" on page 84
Ê "Enabling BitLocker functionality" on page 90
Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
Ê If applicable, "After replacing the system board" on page 94

Fujitsu Server PRIMERGY TX1330 M1 Specifications

General

Memory Slots	4
Form Factor	Tower
Chipset	Intel C226
Processor Sockets	1
Processor	Intel Pentium, Intel Celeron
RAID Support	RAID 0, 1, 5, 10
Drive Bays	8 x 3.5-inch
Operating System Support	Windows Server, Red Hat, SUSE, VMware