I The meaning of further buttons is described in the corresponding
operating manual.
yellow on
Power on delay
I After shutting down, the server
cannot be switched on again right
away. If the On / Off button is
pressed right after shutting down the
server, the power-on indicator will
light up yellow until the delay period
ends and the server will boot.
Symbol Button Function
12
On/Off
button
This button is used to switch the server on or
off.
I If the system is running an ACPI-
compliant operating system, the
pressing the On / Off button will
performs a graceful shutdown.
13 NMI NMI button
This button is used to troubleshoot software
and device driver errors It can be pressed
using the end of a paper clip.
V CAUTION!
Use this button only if directed to do so
by qualified certified maintenance
personnel!
14 RST Reset button
This button is used to reboot the system. It
can be pressed using the end of a paper clip.
V CAUTION!
Risk of data loss!
15 ID ID button
This button highlights the ID indicator on the
front and I/O panels for easy server
identification.
Pos. Indicator Status Description
To Next Page
Loading...
Need help?
General