APPENDIX 4 ALERT LIST
AP-24
156 - 156 Sensor Failure Alarm/B Deviation between
current heading and
plan course is more
than set value.
Default: 30 degrees
Make deviation be-
tween current
heading and plan
course smaller.
158 - 158 Course Difference Warning/
A
Waypoint is now be-
ing approached.
When alert 150 and
151 are not ac-
knowledged, ship
crosses WOL.
When alert 150 is
not acknowledged,
this is generated in-
stead of alert 151.
(30 seconds before
WOL)
Be careful that ship
crossed WPT.
159 - 159 Low Speed Warning/
B
While carrying out
TCS, ship's speed
becomes less than
set value.
Raise speed or
stop track control.
170 - 170 Positioning System
Failure
Warning/
B
All position data has
been lost for more
than 30 seconds.
Check the connec-
tion with all GPS.
171 - 171 Crossing Safety
Contour
Alarm/A When a check area
is set, the vessel
entered a shallower
area than the
threshold set in
[Safety Contour].
Reconfirm Safety
Contour setting or
change the course.
172 - 172 Off Track Alarm Alarm/A Deviation is big be-
tween planning
course and current
heading. While
monitoring route,
ship position devi-
ates XTD Limit.
Reconfirm XTD
Limit or keep own
ship inside of chan-
nel limit.
174 - 174 WPT Approach Alarm/A If this radar is con-
nected in the net-
work to an FMD-
3200/3300 ECDIS
that is interfaced
with an IEC 62065
Ed.2 compliant
TCS* (YOKOGA-
WA PT-900, Tokyo
Keiki PR-9000,
EMRI FAP-3000),
this alert is generat-
ed at each waypoint
if the TCS is not
connected to the
ECDIS in route
monitoring.
Check network and
ECDIS connec-
tions.
*TCS can only be
connected to a
FMD-3200/3300.
ALF ALR
Alert name
Priority/
Category
Meaning Remedy
No. Inst.* No.
To Next Page
Loading...
