Furuno FCR-2139S-BB - Page 507

APPENDIX 4 ALERT LIST
AP-25
176 - 176 System Malfunc-
tion
Warning/
B
A system error has
occurred.
Restart the sys-
tem. If the problem
persists, contact
your dealer.
177 - 177 System Malfunc-
tion of Backup
Warning/
B
A system error has
occurred.
Restart the sys-
tem. If the problem
persists, contact
your dealer.
190 1 531 AIS Target Display
100%
Warning/
A
100% of maximum
number of target
which can be dis-
played is used.
The number of AIS
target became
100% of that can
be displayed.
Change the display
number using filter
function.
190 2 533 AIS Target Capaci-
ty 100%
Warning/
A
100% of memory
capacity for AIS tar-
gets is filled.
Memory for AIS
targets is filled
100%. Cancel un-
necessary targets.
190 3 535 AIS Target Acti-
vate 100%
Warning/
A
100% of capacity
for active AIS is
used.
The number of ac-
tive AIS target be-
came 100% of its
limit. Change the
unnecessary tar-
gets to sleep
mode.
260 - 260 Emergency Call Alarm/A When not acknowl-
edging alerts relat-
ed to WPT
approach or track
control stop alert
during track control,
alert is forwarded to
BNWAS by this sig-
nal on 30 seconds
after passing WOL.
This is not shown.
Acknowledge 152
Wheel Over Line
alert or 153 Track
Control Stop.
10960 - 961 Takeover AMS
Master
Warning/
B
ALF ALR
Alert name
Priority/
Category
Meaning Remedy
No. Inst.* No.