EasyManua.ls Logo

Furuno FCR-2139S-BB - Page 531

Furuno FCR-2139S-BB
541 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FURUNO
FCR-21x9-BB, FCR-28x9 SERIES
SP - 3 E3607S01E-M
5 CHART INDICATION (ECDIS)
5.1 Display contents
Chart materials IMO/IHO S57-3 ENC or C-MAP CM-93/3 vectorized material
Own ship display Own ship mark/track and numeral position in lat/lon,
speed, course and heading
Target tracking (TT)
Range, Bearing, Speed, Course, CPA/TCPA,
Target information from AIS
Other information Route, Waypoint, Nav line, Electronic chart information,
Various alarms
5.2 Display features Chart zoom-in/out, Cursor (EBL, VRM and parallel index lines),
Scroll, Symbol select, One touch activation,
Electric chart information auto-update
One-touch restore One-touch restore of standard mode
5.3 User interface
Position fixing Navigation by position from external EPFS,
Dead reckoning by gyro/log,
Route planning Planning by rhumb line, Great circle, Route creation
Route monitoring Off-track display, Waypoint arrival alarm, Shallow depth alarm,
Route information indication
User chart User chart creation
MOB (Man Overboard) Position, etc. at time of man overboard are recorded and
MOB mark is displayed on the screen.
6 INTERFACE
6.1 Processor unit (EC-3000)
Number of port
Serial 7 ports (IEC61162-1/2: 2 ports, IEC61162-1: 5 ports)
Digital input 1 port: contact signal, 100 ohm max. or 24VDC input
Alarm output 6 ports: contact signal 0.5A/60V max. NC: 4, NO: 2
DVI output 3 ports: DVI-D (2), DVI-I or RGB picture data (1 port for VDR)
USB 4 ports (3 ports for control units)
LAN 2 ports: Ethernet 1000Base-T for network equipment, sensor
adapter and spare
Data sentences (IEC61162-1/2)
Input ABK, ACK, ACN (ACM), ALR, CUR, DBT, DPT, DTM, GGA, GLL,
GNS, HBT, HDT, MTW, MWV, NRX, RMC, RRT, THS, VBW, VDM,
VDO, VDR, VHW, VSD, VTG, ZDA
Output ABM, ACK, ALC, ALF, ALR, ARC, BBM, EVE, HBT, OSD, RRT,
RSD, TLB, TTD, TTM, VSD
6.2 Ethernet interface for IEC61162-450 (EC-3000)
Port (LAN2) 1000Base-TX, IPv4, 8P8C connector
Data sentences Same as 6.1 sentences
IEC61162-450 transmission group
Input MISC, TGTD, SATD, NAVD, VDRD, RCOM, TIME, PROP,
USR1 to USR8
Output Arbitrary (default: TGTD)
Multicast address 239.192.0.1 to 239.192.0.16

Table of Contents

Other manuals for Furuno FCR-2139S-BB

Related product manuals