30. Alerts
30-10
Alert number 381: USER CHART: NEED POINTS /4
------------------------------------
USER CHART HAS MORE THAN 60 LINES OR
20 SYMBOLS AND IT DOES NOT CONTAIN
ANY POINTS. USE 'USER CHART' MENU
TO SELECT A VALID USER CHART OR ADD
POINTS TO CURRENT USER CHART
Alert number 382: USERCHART: FILE NOT FOUND /4
------------------------------------
CANNOT READ USER CHART IN MONITOR
MODE. MOVE USER CHART TO PLAN MODE
TO MAKE POSTPROCESSING AGAIN FOR
USER CHART.
Alert number 390: ROUTE: FILE READ ERROR /4
------------------------------------
CANNOT OPEN ROUTE IN MONITOR MODE.
OPEN ROUTE IN PLAN MODE TO MAKE SOME
MODIFICATION OF WPT DATA IN WPT PAGE.
FOR EXAMPLE CHANGE RADIUS OF ANY WPT.
Alert number 391: ROUTE: FILE READ ERROR /4
------------------------------------
CANNOT READ ROUTE IN MONITOR MODE.
MOVE ROUTE TO PLAN MODE TO MAKE SOME
MODIFICATION OF WPT DATA IN WPT PAGE.
FOR EXAMPLE CHANGE RADIUS OF ANY WPT.
Alert number 392: ROUTE: FILE NOT FOUND /4
------------------------------------
CANNOT READ ROUTE IN MONITOR MODE.
MOVE ROUTE TO PLAN MODE TO MAKE SOME
MODIFICATION OF WPT DATA IN WPT PAGE.
FOR EXAMPLE CHANGE RADIUS OF ANY WPT.
Alert number 454: ROUTE: END REACHED /3
------------------------------------
YOU HAVE PASSED THE FINAL WAYPOINT
OF YOUR MONITORED ROUTE. CURRENT
MONITORED ROUTE HAS AUTOMATICALLY
CANCELLED
Alert number 457: ROUTE: OUTSIDE CHL LIMITS /2/9
------------------------------------
SHIP IS OUTSIDE CHANNEL LIMITS
SPECIFIED FOR CURRENT LEG OF ROUTE.
CHECK SHIP POSITION AND ROUTE
Alert number 459: STEERING PARAMETER ERROR /6
------------------------------------
TRACKPILOT PARAMETER HAS AN ERROR IN
ITS CONTENTS. CHECK AGAIN
INSTALLATION PARAMETERS OF ECDIS.
To Next Page
