GE D90 Plus - Page 427

CHAPTER 7: PROTECTION PROTECTION FLEXLOGIC
D90
PLUS
LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL 417
BKR FAIL 1 RETRIPA................................... Asserted when breaker failure 1 re-trips on phase A (single-pole
schemes only).
BKR FAIL 1 RETRIPB................................... Asserted when breaker failure 1 re-trips on phase B (single-pole
schemes only).
BKR FAIL 1 RETRIPC................................... Asserted when breaker failure 1 re-trips on phase C (single-pole
schemes only).
BKR FAIL 1 T1 OP........................................ Asserted when the breaker failure 1 timer 1 operates.
BKR FAIL 1 T2 OP........................................ Asserted when the breaker failure 1 timer 2 operates.
BKR FAIL 1 T3 OP........................................ Asserted when the breaker failure 1 timer 3 operates.
BKR FAIL 1 TRIP OP.................................... Asserted when breaker failure 1 trip has operated.
BKR FAIL 2...................................................... The same set of operands listed above are available for the
breaker failure 2 element.
Breaker flashover operands
BKR 1 FLSHOVR DPO ................................ Asserted when breaker 1 flashover drops out.
BKR 1 FLSHOVR DPO A............................ Asserted when breaker 1 flashover drops out for phase A.
BKR 1 FLSHOVR DPO B............................ Asserted when breaker 1 flashover drops out for phase B.
BKR 1 FLSHOVR DPO C............................ Asserted when breaker 1 flashover drops out for phase C.
BKR 1 FLSHOVR OP ................................... Asserted when breaker 1 flashover operates.
BKR 1 FLSHOVR OP A ............................... Asserted when breaker 1 flashover operates for phase A.
BKR 1 FLSHOVR OP B ............................... Asserted when breaker 1 flashover operates for phase B.
BKR 1 FLSHOVR OP C ............................... Asserted when breaker 1 flashover operates for phase C.
BKR 1 FLSHOVR PKP ................................. Asserted when breaker 1 flashover picks up.
BKR 1 FLSHOVR PKP A ............................. Asserted when breaker 1 flashover picks up for phase A.
BKR 1 FLSHOVR PKP B ............................. Asserted when breaker 1 flashover picks up for phase B.
BKR 1 FLSHOVR PKP C ............................. Asserted when breaker 1 flashover picks up for phase C.
BKR 2 FLSHOVR........................................... The operands listed above are available for the breaker
flashover 2 element.
Protection contact input operands
CONTACT IP 1 ON ....................................... Asserted when the field contact connected to contact input 1 is
closed.
CONTACT IP 1 OFF...................................... Asserted when the field contact connected to contact input 1 is
opened.
CONTACT IP 1 TROUBLE OP ................... Asserted when there is an internal or external problem with
contact input 1.
CONTACT IP 1 TROUBLE DPO................ Asserted when there are no problems with contact input 1.
CONTACT IP 2 to 40................................... The operands listed above are available for the contact inputs 2
through 40.
Digital counter operands
COUNTER 1 EQL.......................................... Asserted when the output of digital counter 1 is equal to the
comparison value.
COUNTER 1 HI.............................................. Asserted when the output of digital counter 1 is greater than
the comparison value.
COUNTER 1 LO............................................. Asserted when the output of digital counter 1 is less than the
comparison value.
COUNTER 2 to 8.......................................... The operands listed above are also available for digital
counters 2 through 8.
Directional comparison unblocking scheme operands
DCUB OP ........................................................ Asserted when the directional comparison unblocking scheme
operates.