GE LOGIQ P6 Series

GE HEALTHCARE
DIRECTION 5394152, Revision 5
LOGIQ™ P6/P6 PRO SERVICE MANUAL
Chapter 4 - Page 4-19
4-3-11-3 Restore System Presets and Configurations
1.) Insert the Backup/Restore CD-R or DVD-R into the drive.
2.) Press the UTILITY
. key
3.) Select SYSTEM
.menu on the monitor screen
4.) On the monitor display, select BACKUP/RESTORE
.
5.) In the Restore list, select Patient Archive, Report Archive, System Configuration and User Defined
Configuration.
6.) In the Media field, select the Backup/Restore DVD-R.
7.) Select RESTORE
.
d.) The system performs the restore. As it proceeds, status information is displayed on the
Backup/Restore screen.
CAUTION
The restore procedure overwrites the existing database on the local hard drive. Make sure to insert
the correct
CD-R or DVD-R.
Figure 4-16 Backup/Restore Menu