GE LOGIQ P6 Series User Manual

GE HEALTHCARE
DIRECTION 5394152, Revision 5
LOGIQ™ P6/P6 PRO SERVICE MANUAL
Chapter 2 - Page 2-1
Chapter 2
Pre-Installation
Section 2-1
Overview
2-1-1 Purpose of chapter 2
This chapter provides the information required to plan and prepare for the installation of a LOGIQ™ P6/
P6 Pro. Included are descriptions of the facility and electrical needs to be met by the purchaser of the
unit. A checklist is also provided at the end of this section to help determine whether the proper planning
and preparation is accomplished before the actual equipment installation is scheduled.
Table 2-1 Contents in Chapter 2
Section Description Page Number
2-1
Overview
2-1
2-2
General Console Requirements
2-2
2-3
Facility Needs
2-7

GE LOGIQ P6 Series Specifications

General

Power Supply	100-240 VAC, 50/60 Hz
Imaging Modes	B-Mode, M-Mode, Color Doppler, Power Doppler
Applications	Vascular, Musculoskeletal
Operating Temperature	10°C to 40°C
Display	15-inch LCD
Relative Humidity	20% to 80% (non-condensing)