GE LOGIQ P6 Series User Manual

GE HEALTHCARE
DIRECTION 5394152, Revision 5
LOGIQ™ P6/P6 PRO SERVICE MANUAL
Chapter 7 - Page 7-37
7-9-9 Printer Troubleshooting
Figure 7-22 Printer Troubleshooting
Unable to use Printer(s)!
Check that all signal, and power
supply cable connections between
Printer and Scanner are OK.
YES
NO
Is the printer(s) properly
connected?
Are there print papers left?
Insert the printer papers.
NO
YES
Is proper configuration for
the Print key(s) set?
Configure the Print key(s).
NO
See next page.

GE LOGIQ P6 Series Specifications

General

Power Supply	100-240 VAC, 50/60 Hz
Imaging Modes	B-Mode, M-Mode, Color Doppler, Power Doppler
Applications	Vascular, Musculoskeletal
Operating Temperature	10°C to 40°C
Display	15-inch LCD
Relative Humidity	20% to 80% (non-condensing)