GE LOGIQ P6 Series User Manual

GE HEALTHCARE
DIRECTION 5394152, Revision 5
LOGIQ™ P6/P6 PRO SERVICE MANUAL
Chapter 4 - Page 4-31
Section 4-8Mechanical Function Checks
4-8-1 Cover Parts Function Validation
• Check if the FRU parts are assembled tightly by naked eye and hands.
•
Check if there are dents, scratches, or cracks on the FRU parts.
• Check if screws are in place.
Table 4-10 Cover parts of the FRU
No Item
1
Right and Left cover
2
Front cover
3
Monitor Cover set
4
Rear cover
5
Middle cover
6
Top cover
7
Top bottom cover
8
Pole cover
9
Neck front cover
10
Neck rear cover
11
Dummy cover L/R
12
New articulation cover set
13
EMI cover L/R
14
Rear handle
15
Rear hook
16
ECG cable hook
17
Probe Holder
18
Front Dummy cover

GE LOGIQ P6 Series Specifications

General

Power Supply	100-240 VAC, 50/60 Hz
Imaging Modes	B-Mode, M-Mode, Color Doppler, Power Doppler
Applications	Vascular, Musculoskeletal
Operating Temperature	10°C to 40°C
Display	15-inch LCD
Relative Humidity	20% to 80% (non-condensing)