5 System Troubleshooting Tips
•
Complete all portions of Fast Cal. This assures that the air calibration and generator
calibrations are up to date on the system.
•
Scan aborts may occur during scanning. Always be aware of the scan progress during an
exam and click [Resume] as soon as it is posted to continue.
•
In general, wait for a screen transition to take place before making another selection. Typing
values before the user interface displays can result in the wrong screen displayed or the
wrong value entered.
•
If the scanner desktop becomes unresponsive for several minutes, click
and select
Shutdown
, then
Restart
to restart the system. If you cannot select
Shutdown
, turn off the
scanner desktop power switch, wait 10 seconds, then turn the power switch back on.
•
In some cases, the system will notify you of errors and steps to recover from the error. You
should contact your services representative as soon as possible, if notified.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 4 Read Me First 119
To Next Page
Loading...
