GE Revolution CT - Work with Colors; Add Colors

Illustration 23: Cut planes menu on 3D VR view
5.10 Work with colors
Use the following procedures to apply colors to your images.
1.
Display a VR image.
2.
From the Tools section, click the [Advanced VR Settings] icon
3. View the VR Controls screen.
Illustration 24: Advanced VR Settings screen
5.10.1 Add colors
1. Place the 3D cursor on the anatomy of interest.
2.
From the Active Color area, click [Add].
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 16 Reformat 477