GE Revolution CT - Radial Planes on 2 D Views

Illustration 41: Rotation direction
2. Type in the number of images or angle between images in the appropriate field.
Modifying one of these parameters updates the other.
3. Type in the FOV .
4. Select the desired output mode from the menu.
○
Choose Print to send generated images to the default printer (setup the Format and the
display of a Reference Image).
○
Choose Save to save generated images in a new series in the browser.
○
Choose Print/Save to film the generated images from a default printer and save them in
a new series.
5. Click [OK].
7.9.2 Radial planes on 2D views
1. From the Protocols menu, select Fan .
2.
Adjust the center of radial slices (A), first radial plane location (B), and the number of radial
planes (C) on the 2D reference image.
Illustration 42: Radial prescription
3. Enter the Number of Images, Spacing between Images, Slice Thickness, Rendering Mode,
and FOV.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
500 7 Batch Film