GE Revolution CT User Manual

7 Electromagnetic Compatibility Safety
The system needs special precautions regarding EMC and needs to be installed and put into
service according to the EMC information provided in the Technical Reference Manual.
Use of RF (Radio Frequency) sources that intentionally transmit, such as cellular telephones,
transceivers, radio-controlled products, or other RF emitting equipment may cause performance
outside the system's published specifications or other adverse operation.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
68 7 Electromagnetic Compatibility Safety

GE Revolution CT Specifications

General

Detector Coverage	Up to 160 mm
Gantry Tilt	± 30 degrees
Spatial Resolution	Up to 0.23 mm
Scan Range	Up to 200 cm
X-ray Tube Current	Up to 800 mA
Type	Computed Tomography (CT) Scanner
Rotation Speed	0.28 seconds per rotation
Tube Voltage	80 kV to 140 kV
Number of Detector Rows	256
Power Requirements	480 VAC, 3-phase
Detector Rows	256
Coverage	160mm