GE Revolution CT - Set Patient Data Entry Preferences; Add Patient Data Entry Preset; Patient Data Entry Presets

3.4 Set Patient Data Entry Preferences
Use this procedure to set patient data entry preferences.
1.
From the image monitor, click
2.
Click
System Preferences .
3.
From the
System Preferences window, click the Patient Data Entry tab.
Illustration 3: Patient Data Entry Tab
3.4.1 Patient Data Entry Presets
Refer to the following to add, edit or delete:
•
Referring Physician
•
Radiologist
•
Operator
•
Exam Description
The procedures to add, edit or delete are the same for these presets.
3.4.1.1 Add Patient Data Entry Preset
1. Click [Add New…].
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
622 3 System Preferences