Illustration 3: Labels on the front of gantry, rear of table, back of PDU, back of Scanner
Desktop, and side of System Cabinet.
CAUTION
Avoid Injury. Read and understand information in manuals before operating
product.
3.2.2 X-ray Warning Labels
Illustration 4: Label located on Scan Control Interface (Reference 21CFR 1020.30 (j))
WARNING
THIS X-RAY UNIT MAY BE DANGEROUS TO PATIENT AND OPERATOR
UNLESS SAFE EXPOSURE FACTORS, OPERATING INSTRUCTIONS AND
MAINTENANCE SCHEDULES ARE OBSERVED.
TO BE USED BY AUTHORIZED PERSONNEL ONLY.
3.2.3 Table Warning Labels
Illustration 5: Pinch warning label located on the table
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 3 Safety 53
To Next Page
Loading...
