GE Revolution CT - Archive Node Settings; SCU and SCP Services

•
Comments: A space to enter text that is associated with the selected node.
4.1.3 Archive Node Settings
Select the Archive Node option to place the selected node in the Archive destinations. Only
devices or nodes that have this option checked can be used as an archive device. Not all hosts
can be used as archive nodes (for example, another CT system cannot be used as an archive
node, but a PACS system can be used as an archive node).
To be a successful archive node, the node must meet certain DICOM requirements so that
when the data is transferred from the host system to the node, the DICOM handshake can be
successful. The remote host must be a DICOM storage permit provider. This is not necessary
for networking images. The same handshake is not required.
The storage commitment host details are populated from the selected Remote Host Information
area. These fields can be edited
Illustration 23: Archive Node Settings box
4.1.4 SCU and SCP Services
The Services area contains settings for SCU and SCP.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 17 Data Management 525