GE Revolution CT - Smartprep Windows;Elements; Smartprep Baseline Setup Window

d. Set the transition region of interest (ROI) — optional.
e. Perform the monitoring phase.
f.
Transition to the diagnostic scan phase.
5.
Perform diagnostic scanning. (scan phase)
6. Display the resulting report.
3.2 SmartPrep Windows/Elements
This section describes the SmartPrep windows and the buttons, viewports and tools they
contain.
3.2.1 SmartPrep Baseline Setup window
Click on the SmartPrep task to open the SmartPrep baseline setup window. The window also
displays when you confirm the associated diagnostic scan.
Illustration 3: SmartPrep baseline setup
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 12 Scan Applications 313