GE Revolution CT - 11 Use the Dose Audit Tool

11 Use the Dose Audit Tool
The Dose Audit Tool provides:
•
Dose Check Log details exams which exceeded NV or AV values.
•
Protocol Summary for protocol NV values.
•
Invalid Protocols are listed.
•
Export to save Dose Check Log, Protocol Summary and Invalid Protocols data to media.
11.1 Display a Dose Check Log
1.
From the image monitor, click .
2.
From the
Mode menu, click Access Controls , then Dose Audit Tool .
3. From the
Audit Tool window, click Dose Check Log .
4. From the
Log List area, select the desired log and click [OK].
NOTE: If the log data is near the maximum size, the system posts a message to export it.
11.2 Display the Protocol Summary
1.
From the image monitor, click .
2.
From the
Mode menu, click Access Controls , then Dose Audit Tool .
3. From the
Audit Tool window, click Protocol Summary .
A protocol summary list display.
11.3 Display the Invalid Protocols
1.
From the image monitor, click .
2.
From the
Mode menu, click Access Controls , then Dose Audit Tool .
3. From the
Audit Tool window, click Invalid Protocols .
A list of invalid protocols display.
11.4 Export Dose Check Log, Protocol Summary, Invalid Protocols Data and User
Protocols
1.
From the image monitor, click .
2. From the
Mode menu, click Access Controls , then Dose Audit Tool .
3.
Insert CD-R media in the DVD RW drive or insert USB media in the USB port of the media
tower.
4.
From the
Audit Tool window, click Export .
5.
In the Export Media area, select CD/DVD or USB .
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
154 11 Use the Dose Audit Tool