Illustration 3: Add User Window
4. Click [Add User].
If an error occurs, a message displays and the changes are not applied in the database.
Correct the errors and try again.
Common errors include:
○
Username
and
Password
cannot be the same. Change either the
Username
or
Password
.
○
Password
does not meet the minimum length criteria. Choose a longer
Password
.
○
Password
and
Confirm Password
do not match. Make sure these entries match.
User Restricted Fields
Some text fields and buttons on the
Local Users
tab are not selectable under certain conditions.
The following roles, users or groups have one or more of these criteria, and cannot be modified.
•
Roles:
GE Service
,
Administrator
,
Standard User
,
Limited User
,
DC Administrator
and
AV
Exceeding User
•
Users: root, ctuser , insite
○
Permanent: If a user is permanent, he can never be removed. When a permanent user
is in context, [Remove User] is disabled.
○
Content Not Editable: If a user is identified as such, their group memberships cannot be
changed. When a “content not editable” user is in context, [Add To Groups] and
[Remove From Groups] are disabled.
○
Password Not Changeable: If a user is identified as such, their password cannot be
changed; [Change Password] is disabled.
NOTE: “In context” is a HIPAA term indicating that all selections and buttons in the center
panel apply to the selected user or group.
2.7 Add a local group
Use these procedures to add a group.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
598 2 Access Controls
To Next Page
Loading...
