Field Description
Minimum Password Length
○
The minimum length for a new password.
○
If a password is already less than the minimum length, setting this value has no effect. For ex‐
ample, if your password is 8 characters, and the minimum length is changed to 10 characters,
the 8 character password is still valid. However, the next time you change the password, you
must choose a new password that is 10 characters or greater.
○
Minimum password length only applies to local users. Minimum password length for enterprise
users is managed by the enterprise server.
Lock Duration (Minutes)
○
The number of minutes your account is locked after the maximum number of failed log on at‐
tempts.
○
The account can become locked due to failed log on attempts or by the administrator.
3. Click [Apply Configuration] to accept the configuration changes.
Click [Restore Configuration] to undo any configuration changes not yet applied.
○
If there was a problem with the changes (such as an invalid value or an issue contacting
the backend servlet) an error message displays with a description of the error.
○
If the changes were successful, a brief message displays indicating that the changes
were applied.
2.6 Add a local user
Use this procedure to add a local user.
1.
Section 2.4, Open EA3.
2.
From the
Local Users
tab, click [Add Local User].
3. From the
Add User
window, enter the following:
○
User ID
○
Full Name
○
Password
○
Confirm Password
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 19 Access Controls 597
To Next Page
Loading...
