GE Revolution CT - Restart Process

6. From the shutdown dialog, click [Shutdown].
7. The system indicates when it is entering the shutdown state.
8.
The monitors will turn off when shutdown is complete.
2.4.3 Restart process
Use this procedure to restart the system from the desktop.
1.
From the image monitor, click .
2. From the
Mode menu, click Shut Down , then Restart .
3. From the restart dialog, click [Restart].
4. The system indicates when the restart is complete.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 9 Startup and Shutdown 197