GE Revolution CT - Set General Preferences; Set Screensaver Time; Set the Scan Room Playback Volume

3.8 Set General Preferences
Use these procedure to set general system preferences.
1.
From the image monitor, click
2.
Click
System Preferences .
3.
From the
System Preferences window, click the General tab.
Illustration 9: General Tab
3.8.1 Set Screensaver Time
1. In the Screensaver Time area, click and drag the slider to set the amount of time the system
must remain idle before the screensaver becomes active.
2.
Click [Save] to save the new preference, or [Save and Close] to additionally close the
System Preferences window.
3.8.2 Set the Scan Room Playback Volume
1. In the Scan Room Playback Volume area, click and drag the slider to set the volume level.
2.
Click [Save] to save the new preference, or [Save and Close] to additionally close the
System Preferences window.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 20 System Management 629