GE Revolution CT - Assign a Range of Colors; Change a Color; Autofit

5.10.2 Assign a range of colors
1. Select Color .
2.
From the
Transition area, select [Step].
3. Click and drag the colored boxes to adjust the colors to the desired value.
5.10.3 Change a color
1. Select Color .
2.
From the Active Color menu, select a color or click
More Colors to display the color wheel.
3. Optional: On the color wheel, click and drag the circle to the desired color.
4.
Click [Done].
5.11 Autofit
Use this procedure to refine the VR opacity in an image.
1.
Display a VR image.
2.
From the VR tab, click the [VR Settings] icon
3. Place the 3D cursor on the anatomy of interest in any multi-planar view.
4.
From the VR Settings panel, click [AutoFit] or press <A>.
5.
Middle-click and drag the mouse up and down to refine the VR opacity.
6. Click [Save New VR Preset] to save the setting as a new VR preset.
Illustration 25: AutoFit on a vessel (top); AutoFit on the trachea (bottom)
Autofit on a vessel (top). Autofit on the trachea (bottom).
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
478 5 Volume Render