GE Revolution CT - Delete a Protocol; Series Numbering

9. Right-click in the protocol list area and select Paste .
10. Rename the protocol as needed.
a. Click the protocol.
b.
Right-click and select
Rename to enter the New name .
c.
Click [OK].
Or
Click [Edit] to modify the protocol and save the new values.
2.10 Delete a protocol
Use this procedure to delete a protocol from your user defined protocol list. This keeps your
protocol list current by deleting any unnecessary protocols.
NOTE:
Only protocols in the
Adult or Pediatric categories can be deleted.
1.
From the image monitor, click
.
2. Click
Protocol Management , then click Protocol Management again.
3. From the
CT Login authentication window, enter your Log On Name and Password.
4. From the Protocol Selection window, select either the Adult or Pediatric protocol category.
5.
Click the desired anatomical body part to view that protocol list.
6.
Select the protocol you want to delete.
7. Right-click and select Delete .
8. Click [Yes] to confirm the deletion.
2.11 Series Numbering
The system uses the following series numbering schemes:
System Condition
Series Numbering
Primary Recons 1–89
Pre or post scan Secondary Recons 301-389
401-489
SmartPrep 201-289
DMPR 601-689
701-789
801-889
Text Pages
(exam, series, roi)
98
Secondary Capture 99
Cardiac ECG trace per recon 599
Contrast Report 996
Dose SR 997
Dose SC 999
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
582 2 Protocols