GE Revolution CT - Lock or Unlock a User; Remove a User, Group, or Membership; Remove a Group; Remove a User

2. From the bottom of the Local Users tab, select the Change Password on Next Login option.
3. Click [Apply Configuration].
○
The next time the user logs in, he will be required to enter a new Password .
○
Once the new password is entered, the
Change Password on Next Login option is
deselected.
2.13 Lock or unlock a user
Use this procedure to lock or unlock a user from login privileges.
1.
Section 2.4, Open EA3.
2.
From the
Local Users tab, select a user.
3. From the bottom of the
Local Users tab, select the Locked option.
○
When Locked is selected, the user is locked from login, even if he has valid login
credentials.
○
If
Emergency User is enabled on your system, the locked user can still login as an
Emergency User .
4. Click [Apply Configuration].
2.14 Remove a user, group, or membership
Use these procedures to remove a user, group, or membership.
2.14.1 Remove a user
1. Section 2.4, Open EA3.
2.
From the
Local Users tab, select a user.
3. Click [Remove User].
4.
From the
Confirm Removal window, click [Confirm Removal].
Illustration 11: Confirm Removal Window
2.14.2 Remove a group
1. Section 2.4, Open EA3.
2.
From the
Groups tab, select a group.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
604 2 Access Controls