GE Revolution CT - Set PPS Preferences

3.9 Set PPS Preferences
1.
From the image monitor, click
2. Click
System Preferences .
3.
From the
System Preferences window, click the PPS tab.
Illustration 10: PPS Tab
4. In the PPS Enable area, click Yes or No .
5. Enter the following connectivity data: SCP AE Title , SCP Host Name , SCP IP and SCP Port .
6. Click [Save] to save the new preferences, or [Save and Close] to additionally close the
System Preferences window.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 20 System Management 631