GE Revolution CT - Select a Protocol

The item is displayed in the text field
2. Click X to delete the item.
3.3.3 Select a protocol
Use this procedure to select a protocol for scanning.
Illustration 8: Protocol Selection window
1. Select the desired protocol category, then search for a specific protocol using one of the
following methods.
○
Select a protocol from the
Favorites list area.
○
Select an anatomical region and then select a protocol.
○
Search for a protocol in the
Protocol Search field and then select a protocol.
The selected protocol will display in the Selected Protocols area.
NOTE:
Multiple protocols can be selected.
2. Click [Accept].
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 11 Scan 255