GE Revolution CT User Manual

This icon: Identifies a reformat task:
Any reformat task
3.1.2 Reformat processing order
Reformats are processed in order whether they are automatically run or manually run. One does
not interrupt the other.
3.1.3 Processing and transfer status indicators
The process and transfer status of recons and reformats is shown by changing the fields
showing the task name.
This indicator:
Means:
Processing has not started
Currently processing
Completed processing, not transferred
Transfer in progress
Transfer completed
Processing failure
3.1.4 Reformat Settings panel
From the Reconstruction and Image Processing Task List, select a reformat task to display the
Reformat Settings panel.
NOTE:
The settings for the reformat are contained in sections on the
Reformat Settings
panel. These sections are collapsible. When these sections are collapsed, the current
settings for the reformat are shown on the collapsed panel.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
422 3 Direct Multi Planar Reformat (DMPR)

GE Revolution CT Specifications

General

Detector Coverage	Up to 160 mm
Gantry Tilt	± 30 degrees
Spatial Resolution	Up to 0.23 mm
Scan Range	Up to 200 cm
X-ray Tube Current	Up to 800 mA
Type	Computed Tomography (CT) Scanner
Rotation Speed	0.28 seconds per rotation
Tube Voltage	80 kV to 140 kV
Number of Detector Rows	256
Power Requirements	480 VAC, 3-phase
Detector Rows	256
Coverage	160mm