Number Component Description
2 Status Indicator Area Displays information related to connection of accessories (ECG,
respiratory gating), positioning interference, and cradle unlatch.
This information is used in the scan room while positioning the pa‐
tient.
Collision indicator
The Collision light illuminates when there is a possibility that the ta‐
ble, cradle, and gantry could collide. There are elevation collision
sensors on the front and rear table covers. The collision sensors
are active during table elevation.
The light also illuminates if there is ten pounds of resistance during
cradle motion in/out or when reaching the travel limits of the table,
cradle, and gantry motion. In the case of interference, you may
need to raise or lower the table, determine if resistance is being
caused by any patient restraints, accessories, or by the patient.
Cradle unlocked indicator
The Cradle Released indicator illuminates indicating the cradle is
unlatched. When the cradle is unllatched, it is free floating.
Internal ECG indicator
The Internal ECG indicator is lit when an internal ECG gating sig‐
nal is seen by the scanner.
External ECG indicator
The External ECG indicator is lit when an external ECG gating sig‐
nal is seen by the scanner.
3
Patient Exam Information Area
or
ECG Area (Not shown above)
Shown when
Patient/Exam Information
is selected via the Menu
area display button (see row at end of table).
Shown (see example above) when
ECG
is selected via the Menu
area display button (see row at end of table).
4 Menu Area Displays user selectable menu items. Navigate this area using the
Back/Enter/Forward buttons on the Gantry Controls panel.
Settings
The Settings menu item is used to change the following:
•
ECG settings
•
Display brightness setting
•
Background color selection
•
Screen saver selection
See System Preferences section for available settings.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
166 3 Gantry
To Next Page
Loading...
