Command / Description
Scan monitor
(left), scout view‐
port
Scan monitor
(left) viewport
Image monitor
(right) patient
session viewport
ss [<first image> <last image>]
Saves the image orientation, W/L values, graphics, and filter and GSE values of a range of
images that you can set. Typing ss by itself will save settings for the entire series. A Gray‐
Scale Presentation State Object is also created and saved to the data base.
X
tpe
Displays text page for the exam.
X
tm <on> or <off>
Displays or removes horizontal and vertical tick marks (rulers) along the border of the image.
X X X
tmh <on> or <off>
Displays or removes only horizontal tick marks (rulers) along the border of the image.
X X X
tmv <on> or <off>
Displays or removes only vertical tick marks (rulers) along the border of the image.
X X X
tpr
Displays a text page for the image in the primary viewport which lists all the ROI cursors and
their statistics.
X
tps
Displays text page for the exam/series.
X
ua
Displays specified text in a user annotation field on the image.
X X X
wl <level>
Applies specified window-level setting to the display.
X X X
ww <width>
Applies specified window-width setting to the display.
X X X
xr <series number> <image set>: <interval>
Series number: an appropriate series number to be cross-referenced. image set: a consecu‐
tive group of image numbers within the series. interval: the interval of images to be filmed:
two equals every other image, three equals every third image, etc.
X
xra <series number> <image set>: <interval>
Used to add additional cross-referenced groups or series to a scout which already has a
cross-reference on it. series number: an appropriate series number to be cross-referenced.
image set: a consecutive group of image numbers within the series. interval: the interval of
scan plane lines to be displayed: two equals every other image, three equals every third im‐
age, etc.
X
zo <factor>
Factor: magnification factor
Magnifies the image by the factor specified. For example, zo 1.5 displays the image one and
one half times larger than its display size.
X X X
autofit
Returns or sets zoom to a factor of one.
X X X
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 14 View Images 405
To Next Page
Loading...
