4. From the
Edit Patient Data
window, edit the text fields.
○
Click the text you want to edit and enter your changes.
○
The
Exam Number
field cannot be edited.
○
Edit Patient
is not accessible if the exam is in use.
5.
Click [Save] when you are satisfied with the changes and you have entered your initials in
the
Edited By
field. A confirmation window opens.
6.
At the confirmation window, click [Accept].
○
A percentage countdown menu displays until
Edit Patient
is closed and the Patient
Information Edit Log is updated.
○
It takes approximately two minutes to update a 100-image exam.
○
The original exam is replaced with the edited exam and is indicated by
e+1
in the
description field. The number indicates how many times the exam has been edited.
Make a Patient Anonymous
Use this procedure to remove certain exam information. An Anonymous Patient can be created
by exam, series, or image. To set the annotation level to Full or Partial, see the
Set the
anonymize patient annotation level
procedure.
1. From the File Manager, right-click on the exam and then select [Anonymize Patient].
2.
Verify that there is enough disk space to create an anonymous patient exam.
A progress bar displays the process’s status.
Install a SMPTE Pattern
Follow these steps to install a SMPTE pattern to view BRH or quality assurance images. Once
installed the images are in exam 1000, which can be selected from the Exam List. The patient
Name is listed as SMPTE.
1.
Click the Utilities icon
on the image monitor, select
Service
, then
Service Tools
to open
the
Service Desktop
.
2. Click the
Image Quality
tab.
3. Click
Install SMPTE Image
from the menu tree on the left of the window.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 17 Data Management 559
To Next Page
Loading...
